|
Linux on the Lenovo T510i - dmesg
This is for kernel 2.6.34.4. The configuration is not yet
final. May still contain clutter and may be missing drivers.
Linux version 2.6.34.4t510i (root@t510i) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP PREEMPT Sun Aug 15 18:28:26 CEST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf27c000 (usable)
BIOS-e820: 00000000bf27c000 - 00000000bf282000 (reserved)
BIOS-e820: 00000000bf282000 - 00000000bf363000 (usable)
BIOS-e820: 00000000bf363000 - 00000000bf375000 (reserved)
BIOS-e820: 00000000bf375000 - 00000000bf3f6000 (ACPI NVS)
BIOS-e820: 00000000bf3f6000 - 00000000bf40f000 (reserved)
BIOS-e820: 00000000bf40f000 - 00000000bf46f000 (usable)
BIOS-e820: 00000000bf46f000 - 00000000bf668000 (reserved)
BIOS-e820: 00000000bf668000 - 00000000bf6e8000 (ACPI NVS)
BIOS-e820: 00000000bf6e8000 - 00000000bf70f000 (reserved)
BIOS-e820: 00000000bf70f000 - 00000000bf717000 (usable)
BIOS-e820: 00000000bf717000 - 00000000bf71f000 (reserved)
BIOS-e820: 00000000bf71f000 - 00000000bf76c000 (usable)
BIOS-e820: 00000000bf76c000 - 00000000bf778000 (ACPI NVS)
BIOS-e820: 00000000bf778000 - 00000000bf77b000 (ACPI data)
BIOS-e820: 00000000bf77b000 - 00000000bf78b000 (ACPI NVS)
BIOS-e820: 00000000bf78b000 - 00000000bf78c000 (ACPI data)
BIOS-e820: 00000000bf78c000 - 00000000bf79f000 (ACPI NVS)
BIOS-e820: 00000000bf79f000 - 00000000bf7ff000 (ACPI data)
BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0xbf800 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 disabled
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 100000000 mask FC0000000 write-back
4 base 138000000 mask FF8000000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
initial memory mapped : 0 - 01c00000
found SMP MP-table at [c00f68c0] f68c0
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
ACPI: RSDP 000f6890 00024 (v02 LENOVO)
ACPI: XSDT bf7ef947 00094 (v01 LENOVO TP-6M 00001120 LTP 00000000)
ACPI: FACP bf7efb00 000F4 (v04 LENOVO TP-6M 00001120 LNVO 00000001)
ACPI: DSDT bf7efed1 0ECE9 (v01 LENOVO TP-6M 00001120 MSFT 03000001)
ACPI: FACS bf6e7000 00040
ACPI: SSDT bf7efcb4 0021D (v01 LENOVO TP-6M 00001120 MSFT 03000001)
ACPI: ECDT bf7febba 00052 (v01 LENOVO TP-6M 00001120 LNVO 00000001)
ACPI: APIC bf7fec0c 00068 (v01 LENOVO TP-6M 00001120 LNVO 00000001)
ACPI: MCFG bf7fecc8 0003C (v01 LENOVO TP-6M 00001120 LNVO 00000001)
ACPI: HPET bf7fed04 00038 (v01 LENOVO TP-6M 00001120 LNVO 00000001)
ACPI: ASF! bf7fedbe 000A4 (v16 LENOVO TP-6M 00001120 PTL 00000001)
ACPI: SLIC bf7fee62 00176 (v01 LENOVO TP-6M 00001120 LTP 00000000)
ACPI: BOOT bf7fefd8 00028 (v01 LENOVO TP-6M 00001120 LTP 00000001)
ACPI: SSDT bf6e591a 0084B (v01 LENOVO TP-6M 00001120 INTL 20050513)
ACPI: TCPA bf78b000 00032 (v02 PTL CRESTLN 06040000 00005A52)
ACPI: SSDT bf77a000 009F1 (v01 PmRef CpuPm 00003000 INTL 20050513)
ACPI: SSDT bf779000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050513)
ACPI: SSDT bf778000 0049F (v01 PmRef ApTst 00003000 INTL 20050513)
ACPI: Local APIC address 0xfee00000
2176MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bf800
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000001 -> 0x0000009e
0: 0x00000100 -> 0x000bf27c
0: 0x000bf282 -> 0x000bf363
0: 0x000bf40f -> 0x000bf46f
0: 0x000bf70f -> 0x000bf717
0: 0x000bf71f -> 0x000bf76c
0: 0x000bf7ff -> 0x000bf800
On node 0 totalpages: 783280
free_area_init_node: node 0, pgdat c17d94c0, node_mem_map c18ac020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3965 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 4353 pages used for memmap
HighMem zone: 551700 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
early_res array is doubled to 64 at [3000 - 37ff]
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
early_res array is doubled to 128 at [3800 - 47ff]
PERCPU: Embedded 13 pages/cpu @c3400000 s29524 r0 d23724 u2097152
pcpu-alloc: s29524 r0 d23724 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777151
Kernel command line: root=/dev/sda6
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Subtract (67 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0001000000 - 00018a2c74] TEXT DATA BSS
#3 [00018a3000 - 00018aa130] BRK
#4 [00000f68d0 - 0000100000] BIOS reserved
#5 [00000f68c0 - 00000f68d0] MP-table mpf
#6 [000009e800 - 000009f071] BIOS reserved
#7 [000009f185 - 00000f68c0] BIOS reserved
#8 [000009f071 - 000009f185] MP-table mpc
#9 [0000002000 - 0000003000] TRAMPOLINE
#10 [0000007000 - 0000008000] PGTABLE
#11 [00018ab000 - 00018ac000] BOOTMEM
#12 [00018ac000 - 000309c000] BOOTMEM
#13 [00018a2c80 - 00018a2c84] BOOTMEM
#14 [00018a2cc0 - 00018a2d80] BOOTMEM
#15 [00018a2d80 - 00018a2dd4] BOOTMEM
#16 [000309c000 - 000309f000] BOOTMEM
#17 [00018a2e00 - 00018a2ed0] BOOTMEM
#18 [000309f000 - 00030ab000] BOOTMEM
#19 [00018a2f00 - 00018a2f25] BOOTMEM
#20 [00018a2f40 - 00018a2f67] BOOTMEM
#21 [00018aa140 - 00018aa4dc] BOOTMEM
#22 [00018a2f80 - 00018a2fc0] BOOTMEM
#23 [00018a2fc0 - 00018a3000] BOOTMEM
#24 [00018aa500 - 00018aa540] BOOTMEM
#25 [00018aa540 - 00018aa580] BOOTMEM
#26 [00018aa580 - 00018aa5c0] BOOTMEM
#27 [00018aa5c0 - 00018aa600] BOOTMEM
#28 [00018aa600 - 00018aa640] BOOTMEM
#29 [00018aa640 - 00018aa680] BOOTMEM
#30 [00018aa680 - 00018aa6c0] BOOTMEM
#31 [00018aa6c0 - 00018aa700] BOOTMEM
#32 [00018aa700 - 00018aa740] BOOTMEM
#33 [00018aa740 - 00018aa780] BOOTMEM
#34 [00018aa780 - 00018aa7c0] BOOTMEM
#35 [00018aa7c0 - 00018aa800] BOOTMEM
#36 [00018aa800 - 00018aa840] BOOTMEM
#37 [00018aa840 - 00018aa880] BOOTMEM
#38 [00018aa880 - 00018aa8c0] BOOTMEM
#39 [00018aa8c0 - 00018aa900] BOOTMEM
#40 [00018aa900 - 00018aa940] BOOTMEM
#41 [00018aa940 - 00018aa980] BOOTMEM
#42 [00018aa980 - 00018aa9c0] BOOTMEM
#43 [00018aa9c0 - 00018aaa00] BOOTMEM
#44 [00018aaa00 - 00018aaa40] BOOTMEM
#45 [00018aaa40 - 00018aaa80] BOOTMEM
#46 [00018aaa80 - 00018aaac0] BOOTMEM
#47 [00018aaac0 - 00018aab00] BOOTMEM
#48 [00018aab00 - 00018aab40] BOOTMEM
#49 [00018aab40 - 00018aab80] BOOTMEM
#50 [00018aab80 - 00018aabc0] BOOTMEM
#51 [00018aabc0 - 00018aac00] BOOTMEM
#52 [00018aac00 - 00018aac40] BOOTMEM
#53 [00018aac40 - 00018aac80] BOOTMEM
#54 [00018aac80 - 00018aac8f] BOOTMEM
#55 [00018aacc0 - 00018aaccf] BOOTMEM
#56 [0003400000 - 000340d000] BOOTMEM
#57 [0003600000 - 000360d000] BOOTMEM
#58 [00018aad00 - 00018aad04] BOOTMEM
#59 [00018aad40 - 00018aad44] BOOTMEM
#60 [00018aad80 - 00018aad88] BOOTMEM
#61 [00018aadc0 - 00018aadc8] BOOTMEM
#62 [00018aae00 - 00018aaea8] BOOTMEM
#63 [00018aaec0 - 00018aaf28] BOOTMEM
#64 [00030ab000 - 00030af000] BOOTMEM
#65 [00030af000 - 000312f000] BOOTMEM
#66 [000312f000 - 000316f000] BOOTMEM
Initializing HighMem for node 0 (000377fe:000bf800)
Memory: 3098768k/3137536k available (5760k kernel code, 34352k reserved, 2320k data, 460k init, 2224212k highmem)
virtual kernel memory layout:
fixmap : 0xfff1f000 - 0xfffff000 ( 896 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc17e5000 - 0xc1858000 ( 460 kB)
.data : 0xc15a03f0 - 0xc17e4674 (2320 kB)
.text : 0xc1000000 - 0xc15a03f0 (5760 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2260.934 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.86 BogoMIPS (lpj=2260934)
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: Westmere events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20100121
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz stepping 02
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (9043.63 BogoMIPS).
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 9676.000 MB/sec
xor: using function: pIII_sse (9676.000 MB/sec)
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT bf71a918 0042D (v01 PmRef Cpu0Ist 00003000 INTL 20050513)
ACPI: SSDT bf718718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20050513)
ACPI: SSDT bf719a98 00303 (v01 PmRef ApIst 00003000 INTL 20050513)
ACPI: SSDT bf717d98 00119 (v01 PmRef ApCst 00003000 INTL 20050513)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 2 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNCR] (0000:ff)
pci_bus 0000:ff: on NUMA node 0
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xf2427800-0xf242780f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:19.0: reg 10: [mem 0xf2400000-0xf241ffff]
pci 0000:00:19.0: reg 14: [mem 0xf2425000-0xf2425fff]
pci 0000:00:19.0: reg 18: [io 0x1820-0x183f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xf2428000-0xf24283ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf2420000-0xf2423fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xf2428400-0xf24287ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f]
pci 0000:00:1f.2: reg 24: [mem 0xf2427000-0xf24277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf2428800-0xf24288ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x1860-0x187f]
pci 0000:00:1f.6: reg 10: [mem 0xf2426000-0xf2426fff 64bit]
pci 0000:01:00.0: reg 10: [mem 0xcc000000-0xccffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xcdefc000-0xcdefffff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xf2000000-0xf2001fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref]
pci 0000:0d:00.0: reg 10: [mem 0xf2100000-0xf21000ff]
pci 0000:0d:00.0: supports D1 D2
pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.0: PME# disabled
pci 0000:0d:00.1: reg 10: [mem 0xf2100400-0xf21004ff]
pci 0000:0d:00.1: supports D1 D2
pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.1: PME# disabled
pci 0000:0d:00.3: reg 10: [mem 0xf2100800-0xf2100fff]
pci 0000:0d:00.3: supports D1 D2
pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.3: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1 960 MB/s
raid6: int32x2 1085 MB/s
raid6: int32x4 773 MB/s
raid6: int32x8 710 MB/s
raid6: mmxx1 3191 MB/s
raid6: mmxx2 3796 MB/s
raid6: sse1x1 2871 MB/s
raid6: sse1x2 3441 MB/s
raid6: sse2x1 5675 MB/s
raid6: sse2x2 6757 MB/s
raid6: using algorithm sse2x2 (6757 MB/s)
Advanced Linux Sound Architecture Driver Version 1.0.22.1.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009e800 - 000000000009ffff
reserve RAM buffer: 00000000bf27c000 - 00000000bfffffff
reserve RAM buffer: 00000000bf363000 - 00000000bfffffff
reserve RAM buffer: 00000000bf46f000 - 00000000bfffffff
reserve RAM buffer: 00000000bf717000 - 00000000bfffffff
reserve RAM buffer: 00000000bf76c000 - 00000000bfffffff
reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:03: [io 0x164e-0x164f] has been reserved
system 00:03: [io 0x1000-0x107f] has been reserved
system 00:03: [io 0x1180-0x11ff] has been reserved
system 00:03: [io 0x0800-0x080f] has been reserved
system 00:03: [io 0x15e0-0x15ef] has been reserved
system 00:03: [io 0x1600-0x1641] has been reserved
system 00:03: [io 0x1644-0x167f] could not be reserved
system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:03: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:03: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:0c: [mem 0xfeaff000-0xfeafffff] has been reserved
pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io disabled]
pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
pci 0000:00:1c.1: bridge window [mem pref disabled]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
pci 0000:00:1c.4: bridge window [io disabled]
pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
pci_bus 0000:05: resource 2 [mem 0xf2500000-0xf25fffff 64bit pref]
pci_bus 0000:0d: resource 1 [mem 0xf2100000-0xf21fffff]
pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0e: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:0e: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0e: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0e: resource 10 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
has_svm: not amd
kvm: no hardware support
Simple Boot Flag at 0x35 set to 0x1
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Slow work thread pool: Starting up
Slow work thread pool: Ready
NTFS driver 2.1.29 [Flags: R/O].
fuse init (API version 7.13)
msgmni has been set to 1708
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.4: setting latency timer to 64
nvidiafb 0000:01:00.0: power state changed by ACPI to D0
nvidiafb 0000:01:00.0: power state changed by ACPI to D0
nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidiafb: Device ID: 10de0a6c
nvidiafb: unknown NV_ARCH
ACPI: AC Adapter [AC] (on-line)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (46 C)
ACPI: Battery Slot [BAT0] (battery present)
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
floppy0: no floppy controllers found
loop: module loaded
VMware PVSCSI driver - version 1.0.1.0-k
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427100 irq 16
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 16
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427300 irq 16
ata6: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427380 irq 16
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
0000:00:19.0: 0000:00:19.0: Failed to initialize MSI interrupts. Falling back to legacy interrupts.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: WDC WD3200BEVT-08A23T1, 02.01A02, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
ata1.00: configured for UDMA/133
ata1: EH complete
scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-0 02.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:26:2d:f6:c4:45
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: a002ff-0ff
sda:
Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
Copyright (c) 2007-2009 Intel Corporation.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2428000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2428400
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
sda1 sda2 sda3 sda4 <
usbcore: registered new interface driver libusual
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
usbcore: registered new interface driver iowarrior
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
EDAC MC: Ver: 2.1.0 Aug 15 2010
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Driver for HIFN 795x crypto accelerator chip has been successfully registered.
input: AT Translated Set 2 keyboard as /class/input/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: new high speed USB device using ehci_hcd and address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LT09, max UDMA/66
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/66
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N LT09 PQ: 0 ANSI: 5
usb 1-1.3: new full speed USB device using ehci_hcd and address 3
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000
serio: Synaptics pass-through port at isa0060/serio1/input0
usb 1-1.6: new high speed USB device using ehci_hcd and address 4
input: SynPS/2 Synaptics TouchPad as /class/input/input1
ata5: SATA link down (SStatus 0 SControl 300)
HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:01:00.1: setting latency timer to 64
ata6: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver snd-usb-audio
ALSA device list:
#0: HDA Intel at 0xf2420000 irq 17
#1: HDA NVidia at 0xcdefc000 irq 16
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP scalable registered
TCP yeah registered
TCP illinois registered
NET: Registered protocol family 17
Using IPI Shortcut mode
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input2
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda6): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:6.
Freeing unused kernel memory: 460k freed
EXT3-fs (sda6): using internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda7): using internal journal
EXT3-fs (sda7): mounted filesystem with writeback data mode
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ttyS0: LSR safety check engaged!
ttyS0: LSR safety check engaged!
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
|